Pole Display

Clear Display	-	31,17,20
Trailing Codes	-	31
Top Line	-	16,0
Bottom Line	-	16,20

Select System

Utilities Setup

Workstation Hardware Pole Display from the Main Menu. You will then see the pole display setup screen.

The ONLY pole display supported by the system is the LogicControls 3000. If you have any questions on what kind of pole display you have, check with your reseller.

(Click on any field below for context-sensitive help)

Click on or [Tab] to the field you wish to set and type in your desired setting. Continue setting your options in this manner. Select Ok when done to save your changes; or Cancel to abort and lose your changes.

Once you have set use pole to Y and have entered your port and mode command, simply press [F2] to automatically fill in the correct initialization codes.

You must EXIT the system in order for any setup changes to take effect. Additionally, if you are on a network and change shared settings, the other users will not get those settings until they exit the system as well.