Adding Serial Numbers

To add serial numbers, from the serial number screen, select Add from the toolbar. Type in the generic serial number information (Vendor ID, Part No. etc.), which will be used for ALL serial numbers you are currently adding. (Note, if you are adding serial numbers from the receive screen, much of this information will be completed for you based on the information already entered for the receive.) Press [PgDn] or select Save to save this information. You will then see the serial number entry box:

Simply type in the first serial number and press [Enter]. You MUST press [Enter] after each serial number you are entering.

After you have entered all serial numbers, select Close. You will return to the serial number screen. Select Close again to return either to the inventory or receive screen.

You may use your barcode scanner when adding serial numbers as above in lieu of typing them. The process is faster and smoother if your scanner is programmed with a terminator or footer of [Enter].

If you have a large group of SEQUENTIAL serial numbers, you may use the Bulk Add option